Filter
Description
- This UCP PILLOW BLOCK MOUNTED BEARING consists of an INSERT BEARING and a CAST IRON housing
- The INSERT BEARING has Triple-Lip Seal: Unmatched protection in highly contaminated environments. Ensures significant bearing lifespan in severe dust, sand, slurry, and water
- Bearing is Pre-Lubricated with High-Quality Grease, ideal for use in High and Low-temperature settings
- Has a Set Screw Lock on its surface for securing the shaft
- The PILLOW BLOCK can be mounted on levelled surfaces using the Two Bolt Holes
- Grease Fitting Offset on top to Relubricate the bearing
| Item | UCP202-10R3 |
| Series | UCP200 |
| Bearing Number | UC202-10R3 |
| Housing Number | P203 |
| Bearing Inner Diameter Metric | 15.875 mm |
| Bearing Inner Diameter Inch | 5/8 in |
| Bearing Width Inner Ring Matric | 31.00 mm |
| Bearing Width Inner Ring Inch | 1.220 in |
| Bolt Size | 3/8 in |
| Number of Bolts | 2 |
| Bolt Hole Center to Center (e) Matric | 95 mm |
| Bolt Hole Center to Center (e) Inch | 3.74 in |
| Overall Length (a) Matric | 127 mm |
| Overall Length (a) Inch | 5.00 in |
| Overall Height (w) Matric | 60 mm |
| Overall Height (w) Inch | 2.362 in |
| Overall Width (b) Matric | 38 mm |
| Overall Width (b) Inch | 1.496 in |
| Mounting Surface to Shaft Center (h) Matric | 30.2 mm |
| Mounting Surface to Shaft Center (h) Inch | 1.189 in |
| Dynamic Load Rating Cr | 9560 N |
| Static Load Rating Cor | 4750 N |
| Limiting Speed | 9500 r/min |
| Clearance | Normal |
| Bearing Sealing type | R3 Triple-Lip Seal |
| Lubrication Type | Grease Shell RL2 |
| Lubrication Temperature | -20°C to +160°C |
| Rolling Element Indicator | Ball |
| Bearing Material | Gcr15 |
| Housing Material | H2000 Cast Iron |
| Locking Type | Set Screws |
| Weight | 0.600 KG |
